1 lightweight smt miniature coaxial connectors ?1.4 mm mated height n.fl series 2008.6 features 1. low profile nominal mated height is 1.4 mm (max. 1.5 mm) 2. small size: 7.7 mm 2 3. light weight receptacle : 14 mg plug : 28 mg 4. accepts high frequency transmission of dc to 6 ghz. v.s.w.r. = 1.3 max. (dc to 6 ghz) 5. board placement with automatic equipment receptacles are packaged in embossed carrier tape and reel for automatic mounting. 6. plugs are terminated with ultra-fine coaxial (fluorinated resin insulated) cable. 7. special tool for an extraction 8. rohs compliant applications cellular phones, phs, mobile phones, wireless communication devices, electronic measuring instruments, gps, wireless lan, bluetooth and any application requiring high frequency transmission using small coaxial connectors. up to 6 ghz transmission speed 0.8 3 3.1 3.4 dia.0.81 n.fl-lp-040 cable n.fl-r-smt-1 1.4(1.5max) plug receptacle occupied mounting area 1.4(1.5max) 1.9(2.0max) n.fl u.fl-lp(v) mated height comparison (with u.fl-lp(v) ) n.fl plug and receptacle the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
2 n.fl series lightweight smt miniature coaxial connectors ?1.4 mm mated height specifications item specification conditions 1. contact resistance 10 ma max. 2. insulation resistance 500 m ohms min. 100v dc 3. withstanding voltage no flashover or insulation breakdown 200v ac / 1 minute 4. v.s.w.r.(note) 1.3max. dc to 6ghz 5. durability 20 cycles 6. vibration 7. shock 8. humidity 96 hours at +40?, and humidity of 95% 9. temperature cycle no damage, cracks, or parts dislocation 10. salt spray test no excessive corrosion 5% salt water solution, 48 hours acceleration of 735 m/s 2 , 11 ms continuous time waveform: sine half-wave, 3 cycles in each of the 3 axis temperature:-40? / +5? to +35? / +90? / +5? to +35? time: 30 min. / 5 min. max. / 30 min. / 5 min. max. 5 cycles frequency: 10 to 100 hz, single amplitude of 1.5 mm acceleration: 59 m/s 2 , in each of 3 axis 5 cycles contact resistance center contact: 30 m ohms max. outer contact: 30 m ohms max. no damage, cracks, or parts dislocation no electrical discontinuity of 1 s or longer no damage, cracks, or parts dislocation no electrical discontinuity of 1 s or longer no damage, cracks, or parts dislocation insulation resistance: 100 m ohms min. (high humidity) insulation resistance: 500 m ohms min. (dry) no damage, cracks, or parts dislocation center contact: 25 m ohms max. outer contact: 25 m ohms max. nominal characteristic impedance frequency range 50 ohms dc to 6 ghz operating temperature range storage temperature range -40? to +90? (90% rh) -30? to +70? (90% rh) ratings note: information contained in this catalog represents general requirements for this series. contact us for the drawings and sp ecifications for a specific part number shown. * v.s.w.r. measurement system measured as shown on the block diagram below. materials / finishes note1: a n.fl cable assembly (plug) is measured with sma conversion adapters mated with n.fl plugs at both ends of a 100cm coaxial cable harness note2: a n.fl receptacle, which is mounted on a 50 ohms glass epoxy board, is measured with a sma conversion adapter. network analyzer test set test port termination d.u.t test port cable shell phosphor bronze silver plated ------- female center contact phosphor bronze gold plated ------- insulator pbt color: black ul94v-0 part material finish remarks plug receptacle shell phosphor bronze silver plated ------- male center contact brass gold plated ------- insulator lcp color: black ul94v-0 part material finish remarks the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
3 n.fl series lightweight smt miniature coaxial connectors ?1.4 mm mated height receptacle 14 mg yes weight/ea rohs packaging bag (100 pieces per bag) reel (2,000 pieces per reel) reel (5,000 pieces per reel) part number cl no. n.fl-r-smt-1(01) n.fl-r-smt-1(10) n.fl-r-smt-1(40) 331-0332-3-01 331-0332-3-10 331-0332-3-40 b recommended pcb mounting pattern gnd gnd gnd sig ?2 0.6 1.8 2.6 3.1 0.6 2.6 3 0.25 0.8 no conductive traces in this area gnd sig 0.8 1.9 3.8 1.85 2 2.05 all dimensions: mm packaging specifications unreeling direction 2 8 1.75 5.5 12 4 ?1.5 center contact terminal 0.3 1 embossed carrier tape dimensions reel dimensions all dimensions: mm recommended screen thickness: 0.1mm to 0.12mm reel material: plastic ?330 13.5 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
n.fl series lightweight smt miniature coaxial connectors ?1.4 mm mated height 4 plug assembly (plug) plugs can be ordered only as terminated cable assemblies. 2.8 3.4 1.12 how to specify plug cable assembly ordering information standard tolerances for (l) -- -- -- -- (l) a [ ] 04n [ ] lp n.fl 1 2 3 4 5 series name n.fl assembly type lp : single ended 2lp : double ended cable type 04n : dia. 0.81mm ultra-fine coaxial cable cable color 1: white, 2: black total length (mm) length (l) 1 2 3 4 5 (l) standard tolerance l=35 mm to 200 mm 4 mm (note 1) l=200 mm to 500 mm 8 mm l=500 mm to 1000 mm 12 mm l= longer than 1000 mm 1.5% of (l) note1: minimum available length (l) is 35mm note2: contact nearest hrs representative if different tolerances are required. note3: contact nearest hrs representative if one end requires preparation. description part no. of cable assembly n.fl-2lp-04n1-a-(l) dia. 0.81mm double ended coaxial cable, color: white single-ended cable assembly l double-ended cable assembly l all dimensions: mm rohs yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
5 n.fl series lightweight smt miniature coaxial connectors ?1.4 mm mated height conversion adapters sma conversion adapter note: when mating with corresponding part (n.fl-smt- 1) must be pressed down and held to make complete connection. part number hrmj-n.flp-st5 cl no. rohs yes 311-0423-2 part number hrmp-u.flj(40) cl no. rohs yes 311-0301-5-40 part number hrmj-u.flp(40) cl no. rohs yes 311-0300-2-40 all dimensions: mm all dimensions: mm all dimensions: mm (18.3) ?6.35 5.5 6 1/4-36uns-2a (4) this jig is used for extraction from a mating condition. u. fl/ 90 50 3 2.1 ?15 all dimensions: mm part number u.fl-lp(v)-n-2 rohs yes cl no. 331-0493-2 plug extraction tool sma conversion adapter (n.fl / u.fl side plug - sma side jack) note: the u.fl side mating portions has a lower lock retention force than the regular product, therefore, cannot be used for purposes other than performance measurements. 14.05 ?6.35 1/4-36uns-2a 6 5.6 (4.05) sma conversion adapter (n.fl / u.fl side jack - sma side plug) note: the u.fl side mating portions has a lower lock retention force than the regular product, therefore, cannot be used for purposes other than performance measurements. (10.7) 8hex the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
6 n.fl series lightweight smt miniature coaxial connectors ?1.4 mm mated height 1. plug usage precautions u.fl-lp(v)-n-2 extraction tool n.fl-lp-040 plug n.fl-r-smt-1 receptacle (1) mating / unmating (2) pull forces on the cable after connectors are mated (3) precautions ?unmating insert the end of an extraction tool into a space between a plug and receptacle, and pull up the tool in the perpendicular to a mounting surface of a receptacle, as shown in the figure. recomended the use of the extraction tool for unmating. any attempt of unmating by pulling on the cable may result in damage to the mechanical / electrical performance. ?mating do not attempt to insert on an extreme angle. do not twist connectors excessively during mating / unmating. n.fl-lp-040 plug 2.9n max. n.fl-r-smt-1 receptacle do not apply any pull forces after the bending of the cable. 2. receptacle (1) recommended reflow temperature profile q the temperature profile indicates the board surface temperature at the point of contacts with the connector leads. w in individual applications the actual temperature may vary, depending on the solder paste type, volume / thickness and board size / thickness. consult your solder paste and equipment manufacturer for the detailed recommendations. soldering iron temperature: 350c, soldering time: for 5 seconds max. (2) manual soldering (3) recommended metal mask thickness 0.1 mm to 0.12 mm (4) reflow cycles 2 times 80 100 120 140 160 180 200 220 240 260 [ ? ] preheat (130 to 180?) 230? 220? 50 seconds max. 120 seconds max. 60 seconds max. time 250 ? max. for 10 seconds the contents of this catalog are current as of date of 06/2008. contents are subject to change without notice for the purpose o f improvements. 5-23,osaki 5-chome,shinagawa-ku,tokyo 141-8587,japan phone: 81-3-3491-9741, fax: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com (1) operating environment the connectors are not designed to operate in the following environments: exposed to a excessive amounts of fine particles and dust regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses. environments having large rapid variations in temperature. (2) storage conditions - receptacle store in the hirose electric packaging. temperature: -10 to +40?, humidity: 85% max. use within 6 months of delivery. receptacles for which the storage period has elapsed must be tested for solderability to the pc board mounting surface. 3. operating environment and storage conditions the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
